High Quality Refractory Wall Materials Customized Bricks From Shandong China Yhjc

• Customization: Available
• Material: Coal Gangue Shale
• Type: Non Metallic Mineral Manufacturing Industry
• Model NO.: 190mm*190mm*90mm
• Compressive Strength: MU10
• Refractoriness (℃): 1580< Refractoriness< 1770
• Al2O3 %: Coal Gangue Shale
• Usage: Wall
• Color: Single Color
• Certification: ISO9001
• Feature: Heat Insulation, Acid Resistance
• Transport Package: Container
• Specification: 190mm*190mm*90mm
• Trademark: YHJC
• Origin: Shandong China
• HS Code: 69049000
• Production Capacity: 130 Million Yuan

Product Description

Our Sintered Porous Bricks, crafted from premium coal gangue shale and boasting a porosity of 28% or more, are engineered to meet the rigorous GB13544-2011 standard. These bricks, with their fine and abundant pores, are perfect for constructing load-bearing walls, delivering unparalleled benefits such as high alkalinity resistance, exceptional seismic performance, and robust strength. They are not only wear-resistant and compression-resistant but also lightweight, providing excellent insulation. Featuring a novel high-hole design, these bricks are 45% more energy-efficient, significantly boosting the building's usable space, accelerating construction processes, and reducing mortar consumption. When applied to exterior walls, our sintered porous bricks eliminate the need for additional *** prevention or reinforcement, allowing for direct plastering. This feature markedly cuts down project costs and ensures a smooth, bulge-free, and ***-free wall surface over time. In the realm of modern architecture, our sintered porous bricks stand out as the pinnacle of wall material solutions.

China National Inspection and Testing Holding Group Xi'an Co., Ltd

National Building Materials Industry Wall and Roof Material Quality Supervision, Inspection and Testing Center

Inspection report

Number:X12403067

Serial Number

Inspection items

Standard requirements

Inspection results

Single conclusion

Inspection basis

1

Allowable size deviation, mm

Sample mean deviation

long wide high

±2.5 ±2.0 ±1.5

+1.1 +0.8 +1.0

qualified

GB/T13544-2011 6.1 GB/T2542-2012 4

sample range

long wide high

≤8.0 ≤7.0 ≤6.0

2.0 3.0 2.0

2

Appearance quality, block

The number of non-conforming products allowed in one sampling of appearance quality≤7

1

qualified

GB/T2542-2012 5

3

Density Grade

Density,kg/m³

1100~1200

1180

1200 level   qualified

GB/T2542-2012 9

4

Strength Grade

compressive strength, MPa

average value

≥15.0

16.6

MU15 qualified

GB/T2542-2012 7

Standard value

≥10.0

14.1

5

Pore structure and porosity

pass

Rectangular strip hole or rectangular hole

Rectangular hole

qualified

GB/T2542-2012 13

Hole size, mm

Hole width dimension

≤13

11

Hole length dimension

≤40

28

Minimum outer wall thickness,mm

≥12

13

Minimum rib thickness,mm

≥5

7

porosity,%

≥28

32

Hole arrangement

1. All hole widths should be equal, and the holes should be arranged in a unidirectional or bidirectional staggered manner 2. The arrangement of holes should be symmetrical vertically and horizontally, evenly distributed, and the length dimension of the hand held holes must be parallel to the surface of the brick

meet a requirement

6

scum

Each brick or block is not allowed to have severe frosting

Slight frosting

qualified

GB/T2542-2012 11

7

lime blowing

1. For explosive areas with a size greater than 2mm and less than or equal to 15mm, each group of bricks and blocks shall not exceed 15 locations, with no more than 7 locations exceeding 10mm 2. Explosive areas with a damage size greater than 15mm are not allowed to occur

Destroy 10 explosive areas with a size of 2mm~10mm.

qualified

GB/T2542-2012 10

Serial Number

Inspection items

Standard requirements

Inspection results

Single conclusion

Inspection basis

8

Weathering resistance performance

5-hour boiling water absorption rate,%

average value

≤21

19

qualified

GB/T2542-2012 12

Maximum value

≤23

21

Saturation coefficient

average value

≤0.78

0.72

Maximum value

≤0.80

0.75

9

Underfired bricks (blocks) and crispy bricks (blocks), blocks

Insufficient fire bricks (blocks) and crispy bricks (blocks) are not allowed

0

qualified

GB/T13544-2011 6.8 GB/T2542-2012 5

10

Radioactive nuclide limit

internal exposure index Ir

≤1.0

0.4

The main building materials are qualified

GB6566-2010

external exposure index I

≤1.3

0.8